Whirlpool Range Front Leveling Leg - WPW10341186

Whirlpool Range Front Leveling Leg - WPW10341186

Restore firm front support and accurate range leveling with this genuine OEM Whirlpool Range Front Leveling Leg - WPW10341186. The adjustable front foot supports the cabinet and lets the appliance sit level and stable on the floor.

Replace the leg when the threaded shaft or foot is bent, cracked, stripped, seized, missing, or no longer holds its setting. A failed front leg can cause rocking, an uneven cooktop, poor alignment with surrounding cabinets, or added stress on the range frame.

Compatibility: Fits select Whirlpool-built gas and electric ranges sold under Whirlpool, Maytag, Amana, KitchenAid, Jenn-Air, Inglis, Crosley, Admiral, and some Kenmore labels. Representative models include WFC110M0AW0, 4KAER5500AW0, YACR3230BCW0, MGR8800FZ0/MGR8800HK0, WFG775H0, and WFG975H0 families. Exact model verification is required.

Replaces / Cross-References: W10341186.

Technical Specifications

Fitment / What To Verify: Confirm the complete model number and front-leg position. Match the thread, shaft length, foot design, and adjustment range to the appliance parts diagram. Do not substitute a rear leg or a similar-looking universal foot.

Installation Guidance: Disconnect power and shut off gas when applicable. Support the range safely before removing the old leg. Start the new leg by hand to prevent cross-threading, adjust both front corners until the range is level, then confirm all four support points are firm and the anti-tip bracket remains engaged.