EZ-Flo Dishwasher Connection Kit - 48337N

EZ-Flo Dishwasher Connection Kit - 48337N

Install a dishwasher with the correct water and power connection components with this Eastman / EZ-Flo Dishwasher Connection Kit - 48337N. This universal/spec-match kit is selected by installation requirements, hose length, connector size, and power-cord style rather than by a strict appliance model list.

48337N is a 6-foot dishwasher installation kit with a braided stainless steel supply line and angled 3-prong power cord. It is intended for standard dishwasher installations that require 3/8-inch compression water connections and the included elbows, wire nuts, hose clamp, Teflon tape, and Romex connector.

Compatibility: Universal dishwasher installation accessory for installations that match the supplied 3/8-inch compression supply line, 3-prong 13 amp / 125 volt angled cord, and included elbow/hardware set.

Fitment Families: Used for dishwasher installations where the installation guide calls for a separate water supply line and power cord kit. Fit is governed by plumbing/electrical requirements, not brand family.

This part commonly cross-references or replaces previous/service part numbers including 48337, 48337M.

Fitment / What To Verify: Verify local code, whether the dishwasher requires hardwire or cord connection, 3/8-inch compression water connection, 6-foot length, 3-prong angled cord, 13 amp / 125 volt rating, cabinet routing, strain relief/Romex connector need, and whether the dishwasher already includes any of these components.

Please confirm fitment with your appliance model number before ordering.

Is it time to replace?

• Common Symptoms: Leaking or corroded supply connector, missing power cord during dishwasher installation, kinked old hose, damaged wire nuts or strain relief, or a new dishwasher installation that needs a complete hookup kit.
• Visible/Sensory Cues: Cracked or kinked hose jacket, corrosion at compression nuts, stretched routing, damaged cord jacket, missing elbows, missing strain relief, or evidence of seepage at the old supply line.

Pro Tip: Do a dry-fit before pushing the dishwasher into the opening. The hose and cord should route without sharp bends, pinching, or tension at the valve or junction box.

Technical Specifications