Whirlpool Professional Range Infinite Heat Switch - W11318834

Genuine Whirlpool W11318834 infinite heat switch for select JennAir and KitchenAid professional-style ranges. Manufacturer parts catalogs list it on some gas and dual-fuel appliances; it is not a universal coil-burner switch. Confirm the exact switch position and wiring on your full model parts diagram before ordering.

Fitment guidance: For professional-style range models that specifically identify W11318834 as the required control. Check full model and serial number, the control location, knob shaft, wiring connector arrangement, and original component number. This part is not interchangeable with visually similar range switches.

Service and safety note: Disconnect power at the breaker and verify power is off before service. This repair involves line-voltage wiring. Follow the appliance wiring diagram and service manual; replacement terminal positions can differ from the original. Use a qualified appliance technician if you are not experienced with electrical repairs.

Compatible model examples: JDRP748HL01, KFGC558JSC05, KFDC558JPA03. These are examples only; other revisions can use different parts.

Model prefixes to check: JDRP74, KFGC55, KFDC55. A prefix alone does not establish fitment; match the full model and production revision against the parts diagram.

How to find your model number: Check the rating plate around the oven-door frame, behind or beneath the storage drawer, on the frame after the drawer is removed, or under the cooktop. Record the complete model and serial number, then confirm the parts diagram specifies W11318834.

Earlier manufacturer part numbers: W11033497. Confirm any manufacturer substitution for your complete model and production revision.

Technical Specifications