{"title":"Washing Machine Valves","description":"\u003cp\u003eShop washing machine valves for no-fill, slow-fill, leaking, or overfilling washers, including replacement water inlet valves, fill valve assemblies, hot and cold washer valves, solenoids, and connector parts for front-load and top-load laundry repairs that help control water flow, prevent leaks, and restore proper washer filling.\u003c\/p\u003e","products":[{"product_id":"whirlpool-corp-whirlpool-washer-inlet-valve-285805","title":"Whirlpool Washer Water Inlet Valve - 285805","description":"\u003ch2\u003eWhirlpool Washer Water Inlet Valve - 285805\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRestore hot and cold water fill\u003c\/strong\u003e with this genuine Whirlpool Washer Water Inlet Valve - 285805. The valve opens to allow hot and cold water into the washer during wash and rinse portions of the cycle.\u003c\/p\u003e\u003cp\u003e285805 is used when the original washer part is worn, leaking, stripped, broken, or no longer performing correctly. Match by exact model lookup and mechanical configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits These Brands \/ Families:\u003c\/strong\u003e Select Whirlpool-built washer platforms, including Whirlpool, Kenmore, KitchenAid, Roper, Maytag, and related brands where listed.\u003c\/p\u003e\u003cp\u003eThis part commonly replaces or cross-references AP3094541, 868761, 21026, 285805VP, 292197, 3349451, 3354565, 3360387, 3360388, 3360389, 3360391, 3360392, 3429537, 358992, 370067, 388328, 3952163.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment \/ What To Verify:\u003c\/strong\u003e Verify valve body color, two inlet ports, 3\/4-11 x 1\/2 NHT hose threads, 1\/2-inch ID hose compatibility, mounting bracket, and electrical terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease confirm fitment with your appliance model number before ordering.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch3\u003eIs it time to replace?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Symptoms:\u003c\/strong\u003e No hot or cold water, slow fill, washer keeps filling when off, leaking valve, or inlet noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible\/Sensory Cues:\u003c\/strong\u003e Cracked valve body, mineral-clogged screen, corroded terminals, leaking ports, or water seepage after power is removed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePro Tip:\u003c\/strong\u003e If the washer keeps filling after it is unplugged, the inlet valve is usually mechanically stuck open.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable border=\"1\" style=\"width:100%; border-collapse: collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eOEM Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003e285805\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWHIRLPOOL CORP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWasher Water Inlet Valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003ePort \/ Hose Detail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eTwo Inlet Ports; 3\/4-11 x 1\/2 NHT Hose Threads; Compatible With 1\/2 in. ID Hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eCommon Cross References\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eAP3094541, 868761, 21026, 285805VP, 292197, 3349451, 3354565, 3360387, 3360388, 3360389, 3360391, 3360392, 3429537, 358992, 370067, 388328, 3952163\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eCompatibility Family\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eSelect Whirlpool-built washer platforms, including Whirlpool, Kenmore, KitchenAid, Roper, Maytag, and related brands where listed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eFitment Basis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eModel Number, Platform, Part Configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eLegacy part number(s)\/code(s):\u003c\/strong\u003e 292197, 3349451, 3354565, 3360387, 3360388, 3360389, 3360391, 3360392, 3429537, 358992, 370067, 388328, 3952163, 3952164, 3955673, 99989697, W10110517\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e These legacy parts have been replaced by this item. They may not look exactly the same, but the manufacturer of these appliances has assured us that they will function properly.\u003c\/p\u003e\u003cp\u003eIf you have questio\u003c\/p\u003e","brand":"WHIRLPOOL CORP","offers":[{"title":"Default Title","offer_id":41538929918131,"sku":"285805","price":34.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/7322\/0019\/files\/media_18a084e4-4dcf-4cc0-9b9a-08bd7f25a504.jpg?v=1780820690"},{"product_id":"whirlpool-corp-valve-w11210459","title":"Whirlpool Washer Water Inlet Valve - W11210459","description":"\u003ch2\u003eWhirlpool Washer Water Inlet Valve - W11210459\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRestore controlled water fill\u003c\/strong\u003e with this genuine OEM Whirlpool Washer Water Inlet Valve - W11210459. This water inlet valve opens and closes to allow the correct amount of water into the appliance during the fill portion of the cycle.\u003c\/p\u003e\u003cp\u003eW11210459 is a genuine OEM Whirlpool washer water inlet valve used for select washer applications. Replace it when the valve leaks, sticks, hums without opening, fills too slowly, overfills, or no longer responds to the control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits These Brands \/ Families:\u003c\/strong\u003e Fits select Whirlpool-built washer platforms, including Whirlpool, Maytag, Amana, Kenmore, Admiral, Roper, Estate, and related Whirlpool Corporation models when this exact part number is specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment \/ What To Verify:\u003c\/strong\u003e Verify appliance type, connector style, inlet\/outlet orientation, water-line fitting, mounting bracket, electrical rating, and exact model number before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease confirm fitment with your appliance model number before ordering.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch3\u003eIs it time to replace?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Symptoms:\u003c\/strong\u003e No fill, slow fill, leaking at the valve, overfilling, underfilling, or wash performance caused by low water level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible\/Sensory Cues:\u003c\/strong\u003e Mineral buildup, cracked valve body, corroded terminals, seepage at fittings, or restricted inlet screen.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePro Tip:\u003c\/strong\u003e Check household water pressure and shutoff valve position before replacing the inlet valve.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable border=\"1\" style=\"width:100%; border-collapse: collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eOEM Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eW11210459\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWHIRLPOOL CORP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWasher Water Inlet Valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eAppliance Application\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWasher\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eFitment Basis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eExact Appliance Model Number Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eLegacy part number(s)\/code(s):\u003c\/strong\u003e B07PFR8848\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e These legacy parts have been replaced by this item. They may not look exactly the same, but the manufacturer of these appliances has assured us that they will function properly.\u003c\/p\u003e\u003cp\u003eIf you have questions, please message us before ordering so we can address your concerns. Please review our Return Policy before purchasing.\u003c\/p\u003e","brand":"WHIRLPOOL CORP","offers":[{"title":"Default Title","offer_id":41554340937907,"sku":"W11210459","price":48.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/7322\/0019\/files\/media_9d6c74ff-4f27-46fd-9b0d-ca4dcca9f112.jpg?v=1780817902"},{"product_id":"whirlpool-corp-valve-w11038689","title":"Whirlpool Washer Water Inlet Valve Assembly - W11038689","description":"\u003ch2\u003eWhirlpool Washer Water Inlet Valve Assembly - W11038689\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRestore controlled water fill\u003c\/strong\u003e with this genuine OEM Whirlpool Washer Water Inlet Valve Assembly - W11038689. This water inlet valve opens and closes to allow the correct amount of water into the appliance during the fill portion of the cycle.\u003c\/p\u003e\u003cp\u003eW11038689 is a genuine OEM Whirlpool washer water inlet valve assembly used for select washer applications. Replace it when the valve leaks, sticks, hums without opening, fills too slowly, overfills, or no longer responds to the control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits These Brands \/ Families:\u003c\/strong\u003e Fits select Whirlpool, Amana, Maytag, Kenmore, KitchenAid, Jenn-Air, Admiral, Magic Chef, Norge, and Roper washer platforms that use this water inlet valve and inlet assembly.\u003c\/p\u003e\u003cp\u003eThis part commonly replaces previous part numbers including W10776841, W10869800, W11024486, AP6039690.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment \/ What To Verify:\u003c\/strong\u003e Verify hot\/cold inlet orientation, electrical connector, mounting tabs, hose connections, and whether the washer is overfilling, underfilling, or receiving only hot or cold water.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease confirm fitment with your appliance model number before ordering.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch3\u003eIs it time to replace?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Symptoms:\u003c\/strong\u003e No fill, slow fill, leaking at the valve, overfilling, underfilling, or wash performance caused by low water level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible\/Sensory Cues:\u003c\/strong\u003e Mineral buildup, cracked valve body, corroded terminals, seepage at fittings, or restricted inlet screen.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePro Tip:\u003c\/strong\u003e Check household water pressure and shutoff valve position before replacing the inlet valve.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable border=\"1\" style=\"width:100%; border-collapse: collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eOEM Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eW11038689\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWHIRLPOOL CORP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWasher Water Inlet Valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eAppliance Application\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWasher\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWasher Hot\/Cold Water Inlet Control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eCommon Cross References\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eW10776841, W10869800, W11024486, AP6039690\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eFitment Basis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eExact Appliance Model Number Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eLegacy part number(s)\/code(s):\u003c\/strong\u003e W10776841, W10869800, W11024486\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e These legacy parts have been replaced by this item. They may not look exactly the same, but the manufacturer of these appliances has assured us that they will function properly.\u003c\/p\u003e\u003cp\u003eIf you have questions, please message us before ordering so we can address your concerns. Please review our Return Policy before purchasing.\u003c\/p\u003e","brand":"WHIRLPOOL CORP","offers":[{"title":"Default Title","offer_id":41559019782323,"sku":"W11038689","price":71.81,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/7322\/0019\/files\/media_698f107b-69b4-45b8-8ac7-781b61a447e3.jpg?v=1780817825"},{"product_id":"whirlpool-corp-valve-w11165546","title":"Whirlpool Washer Water Inlet Valve - W11165546","description":"\u003ch2\u003eWhirlpool Washer Water Inlet Valve - W11165546\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRestore controlled water fill\u003c\/strong\u003e with this genuine OEM Whirlpool Washer Water Inlet Valve - W11165546. This water inlet valve opens and closes to allow the correct amount of water into the appliance during the fill portion of the cycle.\u003c\/p\u003e\u003cp\u003eW11165546 is a genuine OEM Whirlpool washer water inlet valve used for select washer applications. Replace it when the valve leaks, sticks, hums without opening, fills too slowly, overfills, or no longer responds to the control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits These Brands \/ Families:\u003c\/strong\u003e Fits select Whirlpool-built washer platforms, including Whirlpool, Maytag, Amana, Kenmore, Admiral, Roper, Estate, and related Whirlpool Corporation models when this exact part number is specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment \/ What To Verify:\u003c\/strong\u003e Verify appliance type, connector style, inlet\/outlet orientation, water-line fitting, mounting bracket, electrical rating, and exact model number before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease confirm fitment with your appliance model number before ordering.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch3\u003eIs it time to replace?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Symptoms:\u003c\/strong\u003e No fill, slow fill, leaking at the valve, overfilling, underfilling, or wash performance caused by low water level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible\/Sensory Cues:\u003c\/strong\u003e Mineral buildup, cracked valve body, corroded terminals, seepage at fittings, or restricted inlet screen.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePro Tip:\u003c\/strong\u003e Check household water pressure and shutoff valve position before replacing the inlet valve.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable border=\"1\" style=\"width:100%; border-collapse: collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eOEM Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eW11165546\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWHIRLPOOL CORP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWasher Water Inlet Valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eAppliance Application\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWasher\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eFitment Basis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eExact Appliance Model Number Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eLegacy part number(s)\/code(s):\u003c\/strong\u003e B078PJ6CMZ\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e These legacy parts have been replaced by this item. They may not look exactly the same, but the manufacturer of these appliances has assured us that they will function properly.\u003c\/p\u003e\u003cp\u003eIf you have questions, please message us before ordering so we can address your concerns. Please review our Return Policy before purchasing.\u003c\/p\u003e","brand":"WHIRLPOOL CORP","offers":[{"title":"Default Title","offer_id":41588042268851,"sku":"W11165546","price":65.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/7322\/0019\/files\/media_c6cd67df-ce76-4266-b72c-07f6c4ddb45c.jpg?v=1780817897"},{"product_id":"whirlpool-corp-valve-wpw10144820","title":"Whirlpool Washer Water Inlet Valve - WPW10144820","description":"\u003ch2\u003eWhirlpool Washer Water Inlet Valve - WPW10144820\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRestore controlled washer water fill\u003c\/strong\u003e with this genuine OEM Whirlpool Washer Water Inlet Valve - WPW10144820. This washer water inlet valve opens and closes the hot and\/or cold water circuits so the washer fills at the correct time and rate.\u003c\/p\u003e\u003cp\u003eWPW10144820 is a genuine OEM Whirlpool washer water inlet valve for compatible appliance models where this exact service part number is specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e select Whirlpool-built washer platforms, including Whirlpool, Maytag, Amana, Inglis, and select Kenmore models where this exact part is specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment \/ What To Verify:\u003c\/strong\u003e Verify the washer model number, number of solenoids, hot\/cold port orientation, hose-thread size, outlet port layout, wiring connectors, and mounting bracket shape.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease confirm fitment with your appliance model number before ordering.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch3\u003eIs it time to replace?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Symptoms:\u003c\/strong\u003e Washer will not fill, fills slowly, overfills, hums at the valve, or leaks at the valve body or hose connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible\/Sensory Cues:\u003c\/strong\u003e Cracked valve body, mineral-restricted inlet screens, corroded terminals, leaking ports, or solenoid failure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePro Tip:\u003c\/strong\u003e Clean the supply screens and confirm both household shutoff valves have good pressure before replacing the inlet valve.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable border=\"1\" style=\"width:100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eOEM Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWPW10144820\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWHIRLPOOL CORP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWasher Water Inlet Valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eCompatibility Family\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eselect Whirlpool-built washer platforms, including Whirlpool, Maytag, Amana, Inglis, and select Kenmore models where this exact part is specified.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eReplaces Part Numbers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eW10144820\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eLegacy part number(s)\/code(s):\u003c\/strong\u003e W10144820, W10311458\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e These legacy parts have been replaced by this item. They may not look exactly the same, but the manufacturer of these appliances has assured us that they will function properly.\u003c\/p\u003e\u003cp\u003eIf you have questions, please message us before ordering so we can address your concerns. Please review our Return Policy before purchasing.\u003c\/p\u003e","brand":"WHIRLPOOL CORP","offers":[{"title":"Default Title","offer_id":41699524837555,"sku":"WPW10144820","price":68.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/7322\/0019\/files\/media_ad77aefd-1576-4783-a59d-2d60d1d4e318.jpg?v=1780821269"},{"product_id":"whirlpool-corp-valve-wpw10435242","title":"Whirlpool Washer Water Inlet Valve - WPW10435242","description":"\u003ch2\u003eWhirlpool Washer Water Inlet Valve - WPW10435242\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRestore correct washer filling\u003c\/strong\u003e with this genuine OEM Whirlpool Washer Water Inlet Valve - WPW10435242. This water inlet valve opens and closes electrically to control water flow into the washer during the fill portions of the cycle.\u003c\/p\u003e\u003cp\u003eWPW10435242 is a genuine OEM Whirlpool washer water inlet valve commonly replaced when the original valve leaks, fills slowly, overfills, or no longer directs water correctly during the cycle. Replacing a failing inlet valve helps restore normal fill performance and more reliable cycle operation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Select Whirlpool and related washer platforms that use this exact water inlet valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits These Brands \/ Families:\u003c\/strong\u003e Fits select Select Whirlpool and related washer platforms that use this exact water inlet valve.\u003c\/p\u003e\u003cp\u003eThis part commonly replaces previous part numbers including W10435242 and W10435236.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease confirm fitment with your appliance model number before ordering.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch3\u003eIs it time to replace?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Symptoms:\u003c\/strong\u003e Washer fills slowly, will not fill, overfills, drips between cycles, or one water circuit does not work correctly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible\/Sensory Cues:\u003c\/strong\u003e Mineral buildup at the screens, seepage around the valve body, or electrical solenoids that no longer click or open consistently.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePro Tip:\u003c\/strong\u003e If the washer keeps filling when unplugged, the inlet valve is usually stuck open and should be replaced rather than cleaned.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable border=\"1\" style=\"width:100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eOEM Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWPW10435242\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWhirlpool Corp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWasher Water Inlet Valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eReplaces Part Numbers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eW10435242\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eLegacy part number(s)\/code(s):\u003c\/strong\u003e W10435236, W10435242\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e These legacy parts have been replaced by this item. They may not look exactly the same, but the manufacturer of these appliances has assured us that they will function properly.\u003c\/p\u003e\u003cp\u003eIf you have questions, please message us before ordering so we can address your concerns. Please review our Return Policy before purchasing.\u003c\/p\u003e","brand":"WHIRLPOOL CORP","offers":[{"title":"Default Title","offer_id":41705281650867,"sku":"WPW10435242","price":116.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/7322\/0019\/files\/media_fa1bcdf2-37ae-4a26-bd00-3b511475548a.jpg?v=1780817308"},{"product_id":"ge-washer-quad-water-inlet-valve-wh13x26637","title":"GE Washer Quad Water Inlet Valve - WH13X26637","description":"\u003ch2\u003eGE Washer Quad Water Inlet Valve - WH13X26637\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRestore proper washer filling\u003c\/strong\u003e with this genuine GE Washer Water Inlet Valve Assembly - WH13X26637. The inlet valve opens and closes to route hot, cold, and dispenser water during the cycle.\u003c\/p\u003e\u003cp\u003eWH13X26637 is used when the original washer component is worn, leaking, broken, stripped, or no longer performing its intended function. Match by exact part number and model lookup rather than appearance alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits These Brands \/ Families:\u003c\/strong\u003e Select GE-built washer platforms, including GE and Hotpoint-family laundry models where this exact part number is listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment \/ What To Verify:\u003c\/strong\u003e Verify valve port count, hot\/cold orientation, electrical terminal layout, mounting bracket, dispenser outlet routing, and hose connection sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease confirm fitment with your appliance model number before ordering.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch3\u003eIs it time to replace?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Symptoms:\u003c\/strong\u003e No hot or cold water, slow fill, overfill, water leaks into the tub when off, detergent left in dispenser, or inlet error code.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible\/Sensory Cues:\u003c\/strong\u003e Cracked valve body, mineral-clogged screens, corrosion, leaking ports, buzzing solenoid, or water seepage when unplugged.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePro Tip:\u003c\/strong\u003e Turn off both water supplies and label electrical connectors before removing the valve. Clean inlet screens only if the valve is otherwise functioning correctly.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable border=\"1\" style=\"width:100%; border-collapse: collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eOEM Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWH13X26637\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eGE APPLIANCES\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWasher Water Inlet Valve Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eValve Detail\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eTwo-valve assembly with separate wire terminals; OEM part sold without other accessories\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eCompatibility Family\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eSelect GE-built washer platforms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eFitment Basis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eExact Model Number And Part Configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eLegacy part number(s)\/code(s):\u003c\/strong\u003e WH13X24058\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e These legacy parts have been replaced by this item. They may not look exactly the same, but the manufacturer of these appliances has assured us that they will function properly.\u003c\/p\u003e\u003cp\u003eIf you have questions, please message us before ordering so we can address your concerns. Please review our Return Policy before purchasing.\u003c\/p\u003e","brand":"GE APPLIANCES","offers":[{"title":"Default Title","offer_id":45445861048499,"sku":"WH13X26637","price":58.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/7322\/0019\/files\/media_51ec0d03-ba4d-45f0-8a43-7e87238d64c0.jpg?v=1780820597"},{"product_id":"supco-samsung-washer-cold-water-inlet-valve-wv0312j","title":"Supco Samsung Washer Cold Water Inlet Valve - WV0312J","description":"\u003ch2\u003eSupco Samsung Washer Cold Water Inlet Valve - WV0312J\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRestore cold-water fill operation\u003c\/strong\u003e with this Supco Samsung Washer Cold Water Inlet Valve - WV0312J. This aftermarket replacement valve controls incoming cold water on supported Samsung washer platforms.\u003c\/p\u003e\u003cp\u003eWV0312J is an aftermarket replacement for Samsung-style washer cold inlet valve applications. It should be framed as an aftermarket replacement, not a Samsung OEM part, and matched by exact model, valve body, port orientation, and electrical connector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits These Brands \/ Families:\u003c\/strong\u003e Select Samsung washer platforms where the model lookup and valve configuration match WV0312J.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment \/ What To Verify:\u003c\/strong\u003e Verify the complete washer model number, cold-water valve location, number of outlets, connector shape, mounting bracket, hose routing, and whether the original failure is actually the valve rather than a clogged inlet screen or supply issue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease confirm fitment with your appliance model number before ordering.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch3\u003eIs it time to replace?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Symptoms:\u003c\/strong\u003e No cold fill, slow cold fill, water continues entering when the washer is off, inlet error code, or leakage at the valve body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible\/Sensory Cues:\u003c\/strong\u003e Cracked valve housing, mineral-restricted inlet screen, corroded terminals, buzzing solenoid, or water seepage from the outlet port.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePro Tip:\u003c\/strong\u003e Turn off the water supply and take a photo of the wire and hose layout before removal. Reinstalling hoses in the wrong position can cause dispenser or fill problems.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable border=\"1\" style=\"width:100%; border-collapse: collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWV0312J\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eSUPCO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eAftermarket Washer Cold Water Inlet Valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eReplacement Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eAftermarket Replacement For Select Samsung Applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWasher Cold-Water Fill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eFitment Basis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eModel Number, Valve Configuration, Connector And Port Orientation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eLegacy part number(s)\/code(s):\u003c\/strong\u003e DC62, 30312J, WP34001151\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e These legacy parts have been replaced by this item. They may not look exactly the same, but the manufacturer of these appliances has assured us that they will function properly.\u003c\/p\u003e\u003cp\u003eIf you have questions, please message us before ordering so we can address your concerns. Please review our Return Policy before purchasing.\u003c\/p\u003e","brand":"SUPCO","offers":[{"title":"Default Title","offer_id":45445861146803,"sku":"WV0312J","price":33.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/7322\/0019\/files\/media_154ea1d7-db42-4ce8-a2c9-675c70a808bd.jpg?v=1780820671"},{"product_id":"whirlpool-washer-water-inlet-valve-and-thermistor-assembly-wp3979346","title":"Whirlpool Washer Water Inlet Valve and Thermistor Assembly - WP3979346","description":"\u003ch2\u003eWhirlpool Washer Water Inlet Valve and Thermistor Assembly - WP3979346\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRestore controlled washer filling and temperature sensing\u003c\/strong\u003e with this genuine OEM Whirlpool Washer Water Inlet Valve and Thermistor Assembly - WP3979346. This valve attaches to the water lines and uses solenoids, with the thermistor assembly, to control water entry and temperature feedback on supported washers.\u003c\/p\u003e\u003cp\u003eWP3979346 is a genuine Whirlpool-manufactured washer water inlet valve and thermistor assembly used when the original part is worn, damaged, missing, leaking, noisy, or no longer performing correctly. The key to a correct order is matching the exact appliance model number and the original part design, not just the visible part name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits These Brands \/ Families:\u003c\/strong\u003e Select Whirlpool, Kenmore, Maytag, and Inglis washer platforms.\u003c\/p\u003e\u003cp\u003eThis part commonly replaces previous part numbers including 3979346, 3979347, 8578342, AP6009052, WP3979346VP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment \/ What To Verify:\u003c\/strong\u003e Verify the full washer model number, hot\/cold port orientation, thermistor connector, harness plug, mounting tab style, and inlet screen condition. Filling problems can also come from low supply pressure or blocked screens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease confirm fitment with your appliance model number before ordering.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch3\u003eIs it time to replace?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Symptoms:\u003c\/strong\u003e No hot or cold water, slow fill, leaking at the valve, temperature selection problems, or water entering when the washer is off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible\/Sensory Cues:\u003c\/strong\u003e Cracked valve body, mineral-clogged screens, corroded solenoids, burned connector, or water seepage at the ports.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePro Tip:\u003c\/strong\u003e Replace old fill hoses or washers if they are brittle or leaking, and flush the supply lines before connecting the new valve.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable border=\"1\" style=\"width:100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eOEM Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWP3979346\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWHIRLPOOL CORP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWasher Water Inlet Valve And Thermistor Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eVerified Detail \/ Spec\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWater inlet valve and thermistor assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eCompatibility Family\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eSelect Whirlpool, Kenmore, Maytag, and Inglis washer platforms.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eFitment Basis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eExact Appliance Model Number And Original Part Match\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eReplaces Part Numbers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eW3979346\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eLegacy part number(s)\/code(s):\u003c\/strong\u003e 3979346, 3979347, 8578342\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e These legacy parts have been replaced by this item. They may not look exactly the same, but the manufacturer of these appliances has assured us that they will function properly.\u003c\/p\u003e\u003cp\u003eIf you have questions, please message us before ordering so we can address y\u003c\/p\u003e","brand":"WHIRLPOOL CORP","offers":[{"title":"Default Title","offer_id":45445872255155,"sku":"WP3979346","price":66.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/7322\/0019\/files\/media_4380329c-092b-461c-b648-e9af840edd31.jpg?v=1780821080"},{"product_id":"whirlpool-front-load-washer-water-inlet-valve-wp8181694","title":"Whirlpool Front-Load Washer Water Inlet Valve - WP8181694","description":"\u003ch2\u003eWhirlpool Front-Load Washer Water Inlet Valve - WP8181694\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRestore front-load washer filling\u003c\/strong\u003e with this genuine OEM Whirlpool Front-Load Washer Water Inlet Valve - WP8181694. This valve controls incoming water to the washer on supported front-load platforms.\u003c\/p\u003e\u003cp\u003eWP8181694 is a genuine Whirlpool-manufactured front-load washer water inlet valve used when the original part is worn, damaged, missing, leaking, noisy, or no longer performing correctly. The key to a correct order is matching the exact appliance model number and the original part design, not just the visible part name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits These Brands \/ Families:\u003c\/strong\u003e Select Whirlpool, Maytag, Kenmore, Amana, Crosley, Inglis, Roper, and Whirlpool-built washer platforms\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment \/ What To Verify:\u003c\/strong\u003e Verify model number, hot\/cold port layout, solenoid count, connector style, mounting tabs, and inlet screen condition.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease confirm fitment with your appliance model number before ordering.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch3\u003eIs it time to replace?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Symptoms:\u003c\/strong\u003e Washer will not fill, slow fill, leaks, or water enters when off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible\/Sensory Cues:\u003c\/strong\u003e Cracked valve, clogged screens, burned solenoid, or corroded connector.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePro Tip:\u003c\/strong\u003e Replace old fill hoses if they are swollen, kinked, or leaking.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable border=\"1\" style=\"width:100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eOEM Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWP8181694\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWHIRLPOOL CORP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eFront-Load Washer Water Inlet Valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eCompatibility Family\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eSelect Whirlpool, Maytag, Kenmore, Amana, Crosley, Inglis, Roper, and Whirlpool-built washer platforms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eFitment Basis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eExact Appliance Model Number And Original Part Match\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eReplaces Part Numbers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eW8181694\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eLegacy part number(s)\/code(s):\u003c\/strong\u003e 8181694\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e These legacy parts have been replaced by this item. They may not look exactly the same, but the manufacturer of these appliances has assured us that they will function properly.\u003c\/p\u003e\u003cp\u003eIf you have questions, please message us before ordering so we can address your concerns. Please review our Return Policy before purchasing.\u003c\/p\u003e","brand":"WHIRLPOOL CORP","offers":[{"title":"Default Title","offer_id":45445872320691,"sku":"WP8181694","price":66.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/7322\/0019\/files\/media_01bcaa45-a157-43b2-8eb3-9de7c55ce4ef.jpg?v=1780821150"},{"product_id":"whirlpool-washer-water-inlet-valve-wp8182862","title":"Whirlpool Washer Water Inlet Valve - WP8182862","description":"\u003ch2\u003eWhirlpool Washer Water Inlet Valve - WP8182862\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRestore washer filling\u003c\/strong\u003e with this genuine OEM Whirlpool Washer Water Inlet Valve - WP8182862. This inlet valve controls water entry on supported washer models.\u003c\/p\u003e\u003cp\u003eWP8182862 is a genuine Whirlpool-manufactured washer water inlet valve used when the original part is worn, damaged, missing, leaking, noisy, or no longer performing correctly. The key to a correct order is matching the exact appliance model number and the original part design, not just the visible part name.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFits These Brands \/ Families:\u003c\/strong\u003e Select Whirlpool, Maytag, Kenmore, Amana, Crosley, Inglis, Roper, and Whirlpool-built washer platforms\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment \/ What To Verify:\u003c\/strong\u003e Verify model number, port count, connector style, mounting position, hose routing, and inlet screens.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease confirm fitment with your appliance model number before ordering.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch3\u003eIs it time to replace?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Symptoms:\u003c\/strong\u003e Slow fill, no fill, leaking, or water continues entering when off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible\/Sensory Cues:\u003c\/strong\u003e Mineral-clogged screens, cracked body, seepage, or burned solenoid.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePro Tip:\u003c\/strong\u003e Flush water lines before installing the new valve.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable border=\"1\" style=\"width:100%; border-collapse: collapse;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eOEM Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWP8182862\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWHIRLPOOL CORP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWasher Water Inlet Valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eCompatibility Family\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eSelect Whirlpool, Maytag, Kenmore, Amana, Crosley, Inglis, Roper, and Whirlpool-built washer platforms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eFitment Basis\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eExact Appliance Model Number And Original Part Match\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eReplaces Part Numbers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eW8182862\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eLegacy part number(s)\/code(s):\u003c\/strong\u003e 8182862\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e These legacy parts have been replaced by this item. They may not look exactly the same, but the manufacturer of these appliances has assured us that they will function properly.\u003c\/p\u003e\u003cp\u003eIf you have questions, please message us before ordering so we can address your concerns. Please review our Return Policy before purchasing.\u003c\/p\u003e","brand":"WHIRLPOOL CORP","offers":[{"title":"Default Title","offer_id":45445872353459,"sku":"WP8182862","price":65.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/7322\/0019\/files\/media_14c6fd99-0437-44e7-8f5e-9623e8fa66d2.jpg?v=1780821152"},{"product_id":"ge-washer-triple-water-inlet-valve-wh13x23974","title":"GE Washer Triple Water Inlet Valve - WH13X23974","description":"\u003ch2\u003eGE Washer Triple Water Inlet Valve - WH13X23974\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRestore controlled washer water fill\u003c\/strong\u003e with this genuine OEM GE Washer Triple Water Inlet Valve - WH13X23974. This washer water inlet valve opens and closes the hot and\/or cold water circuits so the washer fills at the correct time and rate.\u003c\/p\u003e\u003cp\u003eWH13X23974 is a genuine OEM GE washer water inlet valve for compatible appliance models where this exact service part number is specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e select GE, Hotpoint, RCA, and GE-built Kenmore washers where this exact part is specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment \/ What To Verify:\u003c\/strong\u003e Verify the washer model number, number of solenoids, hot\/cold port orientation, hose-thread size, outlet port layout, wiring connectors, and mounting bracket shape.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease confirm fitment with your appliance model number before ordering.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch3\u003eIs it time to replace?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Symptoms:\u003c\/strong\u003e Washer will not fill, fills slowly, overfills, hums at the valve, or leaks at the valve body or hose connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible\/Sensory Cues:\u003c\/strong\u003e Cracked valve body, mineral-restricted inlet screens, corroded terminals, leaking ports, or solenoid failure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePro Tip:\u003c\/strong\u003e Clean the supply screens and confirm both household shutoff valves have good pressure before replacing the inlet valve.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable border=\"1\" style=\"width:100%; border-collapse: collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eOEM Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWH13X23974\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eGE APPLIANCES\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWasher Water Inlet Valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eCompatibility Family\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eselect GE, Hotpoint, RCA, and GE-built Kenmore washers where this exact part is specified.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eLegacy part number(s)\/code(s):\u003c\/strong\u003e WH13X10048\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e These legacy parts have been replaced by this item. They may not look exactly the same, but the manufacturer of these appliances has assured us that they will function properly.\u003c\/p\u003e\u003cp\u003eIf you have questions, please message us before ordering so we can address your concerns. Please review our Return Policy before purchasing.\u003c\/p\u003e","brand":"GE APPLIANCES","offers":[{"title":"Default Title","offer_id":45445881462963,"sku":"WH13X23974","price":37.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/7322\/0019\/files\/media_3b4cc3c3-57b1-41d2-9d0f-475bf869b613.jpg?v=1780821545"},{"product_id":"supco-lg-washer-multi-port-water-inlet-valve-wv2008f","title":"Supco LG Washer Multi-Port Water Inlet Valve - WV2008F","description":"\u003ch2\u003eSupco LG Washer Multi-Port Water Inlet Valve - WV2008F\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRestore controlled cold-water filling\u003c\/strong\u003e with this aftermarket replacement Supco LG Washer Multi-Port Water Inlet Valve - WV2008F. This four-solenoid valve controls cold-water flow to supported LG front-load washer fill circuits.\u003c\/p\u003e\u003cp\u003eWV2008F is a Supco aftermarket replacement washer inlet valve for LG valve numbers 5220FR2008F and 5221ER1002B, used when the original valve leaks, will not open, or will not shut off properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Designed for select LG front-load washer platforms that use the matching four-solenoid cold-water valve configuration.\u003c\/p\u003e\u003cp\u003eThis part commonly replaces previous part numbers including 5220FR2008F, 5221ER1002B.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment \/ What To Verify:\u003c\/strong\u003e Verify the full washer model number, original LG valve number, four-solenoid layout, hose-port orientation, wiring connector positions, mounting tabs, and whether the hot valve is separate before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease confirm fitment with your appliance model number before ordering.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch3\u003eIs it time to replace?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Symptoms:\u003c\/strong\u003e Washer will not fill, fills slowly, overfills, leaks at the valve, shows fill errors, or has no cold-water flow to one dispenser circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible\/Sensory Cues:\u003c\/strong\u003e Cracked valve body, mineral buildup on screens, leaking hose connections, damaged solenoid terminals, or one fill path failing while others still work.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePro Tip:\u003c\/strong\u003e Clean the inlet screen and verify household water pressure before replacing the valve. A clogged screen can mimic a failed solenoid.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable border=\"1\" style=\"width:100%; border-collapse: collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eOEM Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWV2008F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eSUPCO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eLG Washer Multi-Port Cold Water Inlet Valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003e120VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eFrequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003e60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eWattage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003e5W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eValve Configuration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eFour-Solenoid Cold Water Valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eCompatibility Family\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eLG Front-Load Washer Platforms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eCommon Cross References\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003e5220FR2008F, 5221ER1002B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eLegacy part number(s)\/code(s):\u003c\/strong\u003e 5220FR2008F\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e These legacy parts have been replaced by this item. They may not look exactly the same, but the manufacturer of these appliances has assured us that they will function properly.\u003c\/p\u003e\u003cp\u003eIf you have questions, please message us before ordering so we can address your concern\u003c\/p\u003e","brand":"SUPCO","offers":[{"title":"Default Title","offer_id":45445886443699,"sku":"WV2008F","price":78.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/7322\/0019\/files\/media_6efcf672-cce7-48f2-9792-a59a7d8b374d.jpg?v=1780821609"},{"product_id":"supco-lg-washer-triple-water-inlet-valve-wv1003a","title":"Supco LG Washer Triple Water Inlet Valve - WV1003A","description":"\u003ch2\u003eSupco LG Washer Triple Water Inlet Valve - WV1003A\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRestore controlled cold-water fill to washer dispenser circuits\u003c\/strong\u003e with this aftermarket replacement Supco LG Washer Triple Water Inlet Valve - WV1003A. This triple-solenoid valve controls cold-water fill, pre-wash, and bleach-dispenser water flow on compatible LG front-load washers.\u003c\/p\u003e\u003cp\u003eWV1003A is a Supco aftermarket replacement washer inlet valve for LG-style triple cold-water valve applications, used when the original valve leaks, will not open, or will not shut off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits select LG front-load washer platforms using the matching three-solenoid cold-water valve design.\u003c\/p\u003e\u003cp\u003eThis part commonly replaces previous part numbers including 5221ER1003A, 5220FR2075L, 5221ER1003C, 5221ER1003D.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment \/ What To Verify:\u003c\/strong\u003e Verify the full washer model number, original valve number, three-solenoid layout, port orientation, bracket shape, wire connector positions, and whether your washer uses a separate hot valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease confirm fitment with your appliance model number before ordering.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch3\u003eIs it time to replace?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Symptoms:\u003c\/strong\u003e Washer will not fill, fills slowly, overfills, has no flow to pre-wash or bleach dispenser, leaks at the valve, or shows fill errors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible\/Sensory Cues:\u003c\/strong\u003e Mineral-clogged inlet screens, cracked plastic body, leaking hose ports, buzzing solenoid, or one dispenser path failing while another still works.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePro Tip:\u003c\/strong\u003e Label the wire connectors and hoses before removal. Multi-port valves can be easy to reconnect incorrectly if the original routing is not documented.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable border=\"1\" style=\"width:100%; border-collapse: collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eOEM Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWV1003A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eSUPCO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eLG Washer Triple Cold Water Inlet Valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003e120VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eFrequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003e60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eWattage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003e5W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eValve Configuration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eThree-Solenoid Cold Water Valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eCompatibility Family\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eLG Front-Load Washer Platforms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eCommon Cross References\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003e5221ER1003A, 5220FR2075L, 5221ER1003C, 5221ER1003D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eLegacy part number(s)\/code(s):\u003c\/strong\u003e 5220FR2075L, 5220FR2075LCM\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e These legacy parts have been replaced by this item. They may not look exactly the same, but the manufacturer of these appliances has assured us that they will function properly.\u003c\/p\u003e\u003cp\u003eI\u003c\/p\u003e","brand":"SUPCO","offers":[{"title":"Default Title","offer_id":45445886574771,"sku":"WV1003A","price":37.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/7322\/0019\/files\/media_a098f984-2c1c-488f-b4fa-5891e365bca1.jpg?v=1780821664"},{"product_id":"supco-lg-washer-hot-water-inlet-valve-wv2006h","title":"Supco LG Washer Hot Water Inlet Valve - WV2006H","description":"\u003ch2\u003eSupco LG Washer Hot Water Inlet Valve - WV2006H\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRestore controlled hot-water filling\u003c\/strong\u003e with this aftermarket replacement Supco LG Washer Hot Water Inlet Valve - WV2006H. This single-solenoid valve controls hot-water flow into compatible LG front-load washers.\u003c\/p\u003e\u003cp\u003eWV2006H is a Supco aftermarket replacement hot water inlet valve for LG valve number 5220FR2006H and related LG references, used when the original hot valve leaks, sticks, or will not open.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits select LG front-load washer platforms that use the matching single-coil hot water inlet valve.\u003c\/p\u003e\u003cp\u003eThis part commonly replaces previous part numbers including 5220FR2006H, 5220FR2006Q, 5220FR2006L.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment \/ What To Verify:\u003c\/strong\u003e Verify the full washer model number, original LG valve number, single-solenoid hot-water layout, inlet screen, hose-port orientation, wire connector, and mounting tabs before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease confirm fitment with your appliance model number before ordering.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch3\u003eIs it time to replace?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Symptoms:\u003c\/strong\u003e No hot-water fill, slow hot fill, hot water continues entering after shutoff, leaks at the valve, or fill-related error codes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible\/Sensory Cues:\u003c\/strong\u003e Mineral blockage, cracked valve body, damaged solenoid terminals, leaking hose thread, or hot valve screen packed with sediment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePro Tip:\u003c\/strong\u003e Confirm the household hot-water supply is open and the fill hose screen is clean before replacing the valve.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable border=\"1\" style=\"width:100%; border-collapse: collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eOEM Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWV2006H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eSUPCO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eLG Washer Hot Water Inlet Valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003e120V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eValve Configuration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eSingle-Coil Hot Water Valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eCompatibility Family\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eLG Front-Load Washer Platforms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eCommon Cross References\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003e5220FR2006H, 5220FR2006Q, 5220FR2006L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eLegacy part number(s)\/code(s):\u003c\/strong\u003e 5220FR2006H\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e These legacy parts have been replaced by this item. They may not look exactly the same, but the manufacturer of these appliances has assured us that they will function properly.\u003c\/p\u003e\u003cp\u003eIf you have questions, please message us before ordering so we can address your concerns. Please review our Return Policy before purchasing.\u003c\/p\u003e","brand":"SUPCO","offers":[{"title":"Default Title","offer_id":45445886607539,"sku":"WV2006H","price":22.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/7322\/0019\/files\/media_f372b500-7168-4acd-b983-97c19aa6544e.jpg?v=1780821717"},{"product_id":"ge-washer-water-inlet-valve-wh13x26535","title":"GE Washer Water Inlet Valve - WH13X26535","description":"\u003ch2\u003eGE Washer Water Inlet Valve - WH13X26535\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRestore correct washer filling\u003c\/strong\u003e with this GE washer water inlet valve. It helps the washer bring in water at the correct time and shut water off when the fill cycle is complete.\u003c\/p\u003e\u003cp\u003eWH13X26535 is a genuine GE washer water valve gasket assembly for select GE washer models. The valve controls incoming water flow to the washer during fill portions of the cycle. It is replaced when the valve leaks, fills too slowly, or no longer opens\/closes correctly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits select GE washer models that use WH13X26535. GE identifies this part as a genuine water valve gasket assembly and advises checking the model number for compatibility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment \/ What To Verify:\u003c\/strong\u003e Verify the washer model number, valve body shape, hose connection orientation, mounting points, solenoid\/electrical connector style, and whether the thermistor or gasket arrangement matches the original valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease confirm fitment with your appliance model number before ordering.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch3\u003eIs it time to replace?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Symptoms:\u003c\/strong\u003e Washer will not fill, fills slowly, leaks at the valve, overfills, or continues dripping water into the tub when off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisible\/Sensory Cues:\u003c\/strong\u003e Cracked valve body, mineral buildup at the screens, burnt or loose solenoid terminals, leaking hose connection, or water entering the tub when the machine is unplugged or idle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePro Tip:\u003c\/strong\u003e Before replacing the valve, check the household shutoff valves and inlet screens. Restricted water supply can look like a weak inlet valve.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable border=\"1\" style=\"width:100%; border-collapse: collapse;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eOEM Part Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWH13X26535\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eGE APPLIANCES\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWasher Water Inlet Valve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eAppliance Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eWasher\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003ePart Function\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eControls Incoming Water Flow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eCompatibility Family\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eSelect GE Washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eFitment Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eModel-Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eLegacy part number(s)\/code(s):\u003c\/strong\u003e WH13X24386\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e These legacy parts have been replaced by this item. They may not look exactly the same, but the manufacturer of these appliances has assured us that they will function properly.\u003c\/p\u003e\u003cp\u003eIf you have questions, please message us before ordering so we can address your concerns. Please review our Return Policy before purchasing.\u003c\/p\u003e","brand":"GE APPLIANCES","offers":[{"title":"Default Title","offer_id":45445892079795,"sku":"WH13X26535","price":44.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/7322\/0019\/files\/media_636208c4-0fe4-4bb4-b51d-f5f20566823a.jpg?v=1780822580"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/7322\/0019\/collections\/remove-text.png?v=1777591532","url":"https:\/\/www.homeownersapplianceparts.com\/collections\/washer-valves.oembed","provider":"Homeowners","version":"1.0","type":"link"}